{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master INOX M SlotMachine solid carbide roughing end mill HPC 16 mm
Article no.: 205448 16
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Milling profile: NR
- Tolerance nominal ⌀: d11
- No. of teeth Z: 5
Product details
Technical Data
| Series | Master INOX | |
| Cutting edge ⌀ DC | 16 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | d11 | |
| No. of teeth Z | 5 | |
| Helix angle | 40 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 22 mm | |
| Overall length L | 82 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer width at 45° | 0.35 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in stainless steel > 900 N/mm2 | 0.05 mm | |
| Feed fz for side milling in INOX > 900 N/mm2 | 0.06 mm | |
| Colour ring | blue | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205448 16 | |
| EAN / GTIN | 4062406276034 | |
| Manufacturer number | 205448 16 |
Application Table
P
150
P
140
P
120
P
110
P
100
M
90
M
80
Description
Version:
With a new-type knuckle form profile, optimised for higher feed rates in INOX. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate. Number of teeth tailored to performance and process reliability.
Advantage:
The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core.
Application:
For roughing machining, particularly suitable for full-slot machining.
Recommendation:
To ensure reliable working, particularly for full slot milling, use arbors with 4 cooling channel bores.