{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 16 mm | |
Coating | DLC | |
Tool material | solid carbide | |
Standard | Manufacturer’s standard | |
Milling profile | WR | |
Tolerance nominal ⌀ | d11 | |
No. of teeth Z | 3 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 32 mm | |
Overhang length L1 incl. recess | 44 mm | |
Recess ⌀ D1 | 15.8 mm | |
Overall length L | 92 mm | |
Shank ⌀ Ds | 16 mm | |
Corner chamfer width at 45° | 0.85 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.09 mm | |
Feed fz for side milling in short-chipping aluminium | 0.11 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 205331 16 | |
EAN / GTIN | 4045197767240 | |
Manufacturer number | 205331 16 |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
Solid carbide roughing end mill, DLC, ⌀ d11 DC: 16mm |
||||||||
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | 0.4×D for side milling; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
Recess ⌀ D1 | 15.8 mm | 15 mm | 15.8 mm | 15 mm | 15 mm | 15 mm | 15.8 mm | 15.8 mm |
Through-coolant | no | no | no | no | yes | no | no | no |
Flute length Lc | 32 mm | 36 mm | 32 mm | 31 mm | 31 mm | 31 mm | 31 mm | 31 mm |
Tool material | solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
Tolerance nominal ⌀ | d11 | f8 | d11 | e8 | e8 | e8 | e8 | e8 |
Feed fz for slot milling in short-chipping aluminium | 0.09 mm | 0.09 mm | 0.09 mm | 0.2 mm | 0.2 mm | 0.2 mm | 0.14 mm | 0.12 mm |