{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill HPC 12 mm
Article no.: 205260 12
Article code:
- Tool material: Solid carbide
- Norm: DIN 6527
- Milling profile: WR
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Norm | DIN 6527 | |
| Milling profile | WR | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 26 mm | |
| Overhang length L1 incl. recess | 36 mm | |
| Recess ⌀ D1 | 11 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner rounding rv | 0.32 mm | |
| Feed fz for slot milling in short-chipping aluminium | 0.15 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.18 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205260 12 | |
| EAN / GTIN | 4062406122485 | |
| Manufacturer number | 205260 12 |
Application Table
N
300
N
280
N
200
N
120
N
100
N
80
N
100
Description
Version:
For roughing.
Special profile for machining non-ferrous metals.
Special profile for machining non-ferrous metals.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide roughing end mill HPC 12 mm |
||||
| Cutting width ae for milling operation | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.3×D for side milling ;0,08×D | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;Full slot cutting depth 1×D |
| Norm | DIN 6527 | DIN 6527 | Manufacturer’s standard | Manufacturer’s standard |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 45 | 40 | 45 | 40 |
| Shank ⌀ Ds | 12 | 12 | 12 | 12 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |