{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel solid carbide finishing cutter HPC 4 mm
Article no.: 204012 4
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 7
Product details
Technical Data
| Series | Master Steel | |
| Cutting edge ⌀ DC | 4 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 7 | |
| Helix angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.1×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 11 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.04 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.02 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 204012 4 | |
| EAN / GTIN | 4045197886378 | |
| Manufacturer number | 204012 4 |
Application Table
P
360
P
340
P
300
P
290
P
200
M
130
M
120
S
100
K
300
Description
Version:
For finishing operations.
Special geometry for optimum chip evacuation.
Unequal spacing gives high intrinsic stability and smooth cutting action.
For profile milling as a finishing operation.
Suitable for machining titanium and titanium alloys.
Special geometry for optimum chip evacuation.
Unequal spacing gives high intrinsic stability and smooth cutting action.
For profile milling as a finishing operation.
Suitable for machining titanium and titanium alloys.
Note:
ae max = 0.1×D
Can be reground from ⌀ DC = 6 mm.
Can be reground from ⌀ DC = 6 mm.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
GARANT Master Steel solid carbide finishing cutter HPC 4 mm |
||||
| Coating | TiAlN | TiAlN | TiAlN | TiAlN |
| Cutting width ae for milling operation | 0.1×D for side milling | 0.05×D for side milling | 0.1×D for side milling | 0.1×D for side milling |
| Helix angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
| Tolerance nominal ⌀ | f8 | h10 | f8 | 0 / -0.03 |
| Feed fz for side milling in steel < 900 N/mm2 | 0.02 mm | 0.032 mm | 0.02 mm | 0.032 mm |
| Direction of infeed | horizontal | horizontal | horizontal | horizontal |
| Shank ⌀ Ds | 6 mm | 6 mm | 6 mm | 6 mm |