{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HOLEX Pro Steel solid carbide finishing cutter HPC, TiAlN, ⌀ DC: 8mm
Article no.: 203624 8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: 0 / -0.03
- No. of teeth Z: 6
Product details
Technical Data
| Series | Pro Steel | |
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | 0 / -0.03 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 32 mm | |
| Overall length L | 74 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer width at 45° | 0.08 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.063 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203624 8 | |
| EAN / GTIN | 4062406252113 | |
| Manufacturer number | 203624 8 |
Application Table
P
120
P
110
P
100
P
90
P
80
H
60
M
80
M
60
Description
Version:
For finishing operations. Special geometry for optimum chip evacuation. For profile milling as a finishing operation. Very sturdy version with strengthened core.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
HOLEX Pro Steel solid carbide finishing cutter HPC, TiAlN, ⌀ DC: 8mm |
|||
| Colour ring | green | green | without |
| Overall length L | 74 mm | 74 mm | 90 mm |
| Through-coolant | no | no | no |
| Type | N | N | N |
| Feed fz for side milling in steel < 900 N/mm2 | 0.063 mm | 0.043 mm | 0.063 mm |
| Corner chamfer width at 45° | 0.08 mm | 0.08 mm | 0.1 mm |
| Type of product | End / face mill | End / face mill | End / face mill |