GARANT Diabolo solid carbide milling cutter HPC 14 mm

Article no.: 203282 14

⌀ e8 D_C (mm):

Quantity

Product details

Series		Diabolo
Cutting edge ⌀ D_C		14 mm
Coating		TiAlN
Tool material		Solid carbide
Standard		Manufacturer’s standard
Type		H
Tolerance nominal ⌀		e8
No. of teeth Z		6
Helix angle		50 degrees
Helix angle characteristic		unequal spacing
Direction of infeed		horizontal and oblique
Cutting width a_e for milling operation		0.05×D for side milling
Shank		DIN 6535 HA to h6
Through-coolant		no
Machining strategy		HPC
Flute length L_c		42 mm
Overall length L		100 mm
Shank ⌀ D_s		14 mm
Corner chamfer angle		90 degrees
Feed f_z for side milling in steel < 65 HRC		0.025 mm
Colour ring		red
Type of product		End / face mill

170

170

170

145

100

GARANT Diabolo:
Special geometry, coating and carbide, specially for hard machining.

For profile milling as finishing.
(Plunge cutting only to shallow depths).

	This article	Recommendations
	GARANT Diabolo solid carbide milling cutter HPC 14 mm	GARANT Diabolo solid carbide milling cutter HPC 14 mm	Solid carbide end mill 14 mm
Coating	TiAlN	TiAlN	TiAlN
Colour ring	red	red	red
Through-coolant	no	no	no
Standard	Manufacturer’s standard	DIN 6527	Manufacturer’s standard
Flute length L_c	42	30	42
Helix angle characteristic	unequal spacing	unequal spacing	unequal spacing
Direction of infeed	horizontal and oblique	horizontal and oblique	horizontal and oblique