{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Titan solid carbide milling cutter HPC/TPC 5 mm
Article no.: 203157 5
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 5
Product details
Technical Data
| Series | Master Titan | |
| Cutting edge ⌀ DC | 5 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 5 | |
| Helix angle | 40 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling; 0,08×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC; TPC | |
| Flute length Lc | 13 mm | |
| Overhang length L1 incl. recess | 18 mm | |
| Recess ⌀ D1 | 4.8 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner rounding rv | 0.1 mm | |
| Feed fz for slot milling in titanium > 850 N/mm2 | 0.018 mm | |
| Feed fz for side milling in titanium > 850 N/mm2 | 0.022 mm | |
| Colour ring | pink | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203157 5 | |
| EAN / GTIN | 4045197989741 | |
| Manufacturer number | 203157 5 |
Application Table
S
60
Description
Version:
For roughing and finishing at very high feed rates and smooth cutting action for the best tool life and high metal removal rate.
Specially ground with corner radii similar to torus cutters and special coating.
Dimensions to DIN 6527 long.
Specially ground with corner radii similar to torus cutters and special coating.
Dimensions to DIN 6527 long.
Application:
For milling titanium and titanium alloys.
Note:
Can be reground when used as a TPC milling cutter.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
GARANT Master Titan solid carbide milling cutter HPC/TPC 5 mm |
|||
| Coating | TiAlN | uncoated | TiAlN |
| Colour ring | pink | yellow | pink |
| Overall length L | 57 | 57 | 50 |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Flute length Lc | 13 | 9 | 8 |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Corner rounding rv | 0.1 | 0.2 | 0.04 |