{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter with internal coolant supply MTC 6 mm
Article no.: 202278 6
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Flute length Lc | 13 mm | |
| Overhang length L1 incl. recess | 19 mm | |
| Recess ⌀ D1 | 5.7 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank form | HA | |
| Corner chamfer width at 45° | 0.2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.025 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.03 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202278 6 | |
| EAN / GTIN | 4045197655141 | |
| Manufacturer number | 202278 6 |
Application Table
N
480
N
440
N
400
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
300
N
160
N
200
Description
Version:
With the latest generation of DLC coating sp2.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Lengths similar to DIN 6527 long.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Lengths similar to DIN 6527 long.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Note:
NEW GENERATION AVAILABLE!
Recommended successor product is No. 202006.
Recommended successor product is No. 202006.