- The item cannot be ordered due to missing prices.
Please enter all required fields.

Solid carbide milling cutter MTC, DLC, ⌀ h6 D_C: 16mm

Article no.: 202271 16

Solid carbide milling cutter MTC, DLC, ⌀ h6 D<sub>C</sub>: 16mm

⌀ h6 D_C (mm):

Quantity

Tool material: Solid carbide
Standard: Manufacturer’s standard
Type: W
Tolerance nominal ⌀: h6
No. of teeth Z: 3

All product details

Flip Catalogue

Product details

Technical Data

Cutting edge ⌀ D_C		16 mm
Coating		DLC
Tool material		Solid carbide
Standard		Manufacturer’s standard
Type		W
Tolerance nominal ⌀		h6
No. of teeth Z		3
Helix angle		45 degrees
Helix angle characteristic		unequal spacing
Direction of infeed		horizontal, oblique and vertical
Cutting width a_e for milling operation		Full slot cutting depth 1×D; 0.5×D for side milling
Shank		DIN 6535 HB to h6
Balance quality with shank		G 2.5 with HB
Through-coolant		no
Machining strategy		MTC
Flute length L_c		36 mm
Overhang length L₁ incl. recess		58 mm
Recess ⌀ D₁		15 mm
Overall length L		108 mm
Shank ⌀ D_s		16 mm
Shank form		HB
Corner chamfer width at 45°		0.2 mm
Corner chamfer angle		45 degrees
Feed f_z for slot milling in short-chipping aluminium		0.065 mm
Feed f_z for side milling in short-chipping aluminium		0.09 mm
Colour ring		yellow
Type of product		End / face mill

Identification numbers & Classifications

Article number		202271 16
EAN / GTIN		4045197860149
Manufacturer number		202271 16

Application Table

480

440

400

200

160

200

150

130

180

160

150

130

160

300

160

200

Description

Version:

With the latest generation of DLC coating sp².
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.

Application:

Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.

Note:

NEW GENERATION AVAILABLE!
Recommended successor product is No. 202014.

Downloads & documents

Data sheet

Flip Catalogue

Compare with similar products

	This article	Recommendations
	Solid carbide milling cutter MTC, DLC, ⌀ h6 D_C: 16mm	Solid carbide slot drill, DLC, ⌀ e8 D_C: 16mm	Solid carbide milling cutter MTC, uncoated, ⌀ D_C: 16mm	Solid carbide milling cutter MTC, uncoated, ⌀ D_C: 16mm	Solid carbide milling cutter MTC, DLC, ⌀ D_C: 16mm	Solid carbide milling cutter MTC, DLC, ⌀ D_C: 16mm	Solid carbide milling cutter DIN 6535 HB, uncoated, ⌀ e8 D_C: 16mm	Solid carbide slot drill, uncoated, ⌀ e8 D_C: 16mm	Solid carbide milling cutter MTC, uncoated, ⌀ h6 D_C: 16mm	Solid carbide milling cutter MTC, uncoated, ⌀ h6 D_C: 16mm	Solid carbide milling cutter MTC, DLC, ⌀ h6 D_C: 16mm	Solid carbide milling cutter, uncoated, ⌀ e8 D_C: 16mm	GARANT Master Alu PickPocket solid carbide roughing end mill HPC, uncoated, ⌀ e8 D_C: 16mm	GARANT Master Alu PickPocket solid carbide roughing end mill HPC, uncoated, ⌀ e8 D_C: 16mm	GARANT Master Alu PickPocket solid carbide roughing end mill HPC, uncoated, ⌀ e8 D_C: 16Mmm
Corner chamfer angle	45 degrees	90 degrees	45 degrees	90 degrees	45 degrees	90 degrees	90 degrees	90 degrees	45 degrees	90 degrees	90 degrees	90 degrees	90 degrees	90 degrees	90 degrees
Cutting width a_e for milling operation	Full slot cutting depth 1×D; 0.5×D for side milling	Full slot cutting depth 1×D; 0,25×D ved beskæring	Full slot cutting depth 1×D; 0.5×D for side milling	Full slot cutting depth 1×D; 0.5×D for side milling	Full slot cutting depth 1×D; 0.5×D for side milling	Full slot cutting depth 1×D; 0.5×D for side milling	Full slot cutting depth 1×D; 0.5×D for side milling	Full slot cutting depth 1×D; 0.5×D for side milling	Full slot cutting depth 1×D; 0.5×D for side milling	Full slot cutting depth 1×D; 0.5×D for side milling	Full slot cutting depth 1×D; 0.5×D for side milling	Full slot cutting depth 1×D; 0.5×D for side milling	Full slot cutting depth 1×D; Full slot cutting depth 1×D	Full slot cutting depth 1×D; Full slot cutting depth 1×D	Full slot cutting depth 1×D; Full slot cutting depth 1×D
Overall length L	108 mm	92 mm	92 mm	92 mm	92 mm	92 mm	92 mm	92 mm	108 mm	108 mm	108 mm	110 mm	92 mm	108 mm	92 mm
Cutting edge ⌀ D_C	16 mm	16 mm	16 mm	16 mm	16 mm	16 mm	16 mm	16 mm	16 mm	16 mm	16 mm	16 mm	16 mm	16 mm	16 mm
Tool material	Solid carbide	Solid carbide	Solid carbide	Solid carbide	Solid carbide	Solid carbide	Solid carbide	Solid carbide	Solid carbide	Solid carbide	Solid carbide	Solid carbide	Solid carbide	Solid carbide	Solid carbide
Type	W	W	W	W	W	W	W	W	W	W	W	W	W	W	W
Direction of infeed	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical	horizontal, oblique and vertical