{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill 40 mm
Article no.: 192970 40
Article code:
- Tool material: HSS Co 8
- Milling profile: NR
- Tolerance nominal ⌀: k12
- No. of teeth Z: 6
- Helix angle: 30
Product details
Technical Data
| Cutting edge ⌀ DC | 40 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 6 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal and oblique | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 32 mm | |
| Overall length L | 95 mm | |
| Shank ⌀ Ds | 25 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.055 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192970 40 | |
| EAN / GTIN | 4045197109118 | |
| Manufacturer number | 192970 40 |
Application Table
N
83
P
28
P
23
P
23
P
12
K
23
N
55
Description
Version:
Relief ground knuckle form profile.
End face recessed. Wide lands permit frequent regrinding without losing the profile.
End face recessed. Wide lands permit frequent regrinding without losing the profile.
Advantage:
For roughing at low cutting depths (predominantly face milling).
Very reliable, due to lower load on the machine spindle.
Very reliable, due to lower load on the machine spindle.