{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 4 mm | |
Coating | uncoated | |
Tool material | HSS Co 8 | |
Standard | Manufacturer’s standard | |
Type | N | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Shank | HB with h6 | |
Through-coolant | no | |
Flute length Lc | 7 mm | |
Overall length L | 38 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in steel < 750 N/mm2 | 0.005 mm | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 191360 4 | |
EAN / GTIN | 4045197102058 | |
Manufacturer number | 191360 4 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
Mini milling cutter HSS-Co8, uncoated, ⌀ e8 DC: 4mm |
|||||||
Overall length L | 38 mm | 63 mm | 63 mm | 38 mm | 42 mm | 42 mm | 55 mm |
Standard | Manufacturer’s standard | DIN 844 B | DIN 844 B | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | DIN 844 |
Cutting edge ⌀ DC | 4 mm | 4 mm | 4 mm | 4 mm | 4 mm | 4 mm | 4 mm |
Flute length Lc | 7 mm | 19 mm | 19 mm | 7 mm | 11 mm | 11 mm | 12 mm |
Helix angle | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees |
No. of teeth Z | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |