{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Lama per seghe circolari per inox VA fine 275X2,5 mm
Article no.: 177500 275X2,5
Article code:
- Materiale da taglio: HSS E
Product details
Technical Data
| ⌀ | 275 mm | |
| Spessore | 2,5 mm | |
| Materiale da taglio | HSS E | |
| ⌀ Foro | 40 mm | |
| Numero denti Z | 280 | |
| Passo t | 3 mm | |
| Numero di fori di trascinamento | 2; 4 | |
| ⌀ Foro di trascinamento | 9; 12 mm | |
| Interasse fori di trascinamento | 55; 64 mm | |
| Passaggio interno per LR | no | |
| Tipo di prodotto | Lama per seghe circolari |
Identification numbers & Classifications
| Article number | 177500 275X2,5 | |
| EAN / GTIN | 4045197245298 |
Application Table
P
37
P
22
P
20
P
15
P
11
M
11
M
11
S
15
K
27
N
400
Description
Version:
Precision toothing and very fine ground side faces. Rake angle especially for stainless steels. Nitrided surface: hard, durable protection against edge build-up.
Application:
Pitch t: (tooth form)
- 3 mm (BW) − For thin pipes, profiles, sheet metal with 1 − 2 mm wall thickness.
- 4 mm (BW) − For pipes, profiles, sheet metal with 1.5 − 4 mm wall thickness.
- 6 mm (HZ) − For pipes, profiles and solid material above 4 mm wall thickness or cross−section up to a maximum of. 50 mm.
- 8 mm (HZ) − For solid material above 50 mm.
Suitable for:
EISELE and TRENNJAEGER cold circular saws.
Note:
- For optimum performance and service life: use coolant concentrate No. 084260.
- The concentricity and axial run-out values are considerably better than the figures according to DIN 1840, in some cases by up to 50 %.