{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Alu solid carbide high-performance reamer HPC blind hole, DLC, Nominal ⌀ DC: 10mm
Article no.: 164405 10
Article code:
- Tolerance: configurable
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Through-coolant: yes, with 25 bar
Product details
Technical Data
| Nominal ⌀ DC | 10 mm | |
| Coating | DLC | |
| Tolerance | configurable | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Through-coolant | yes, with 25 bar | |
| Shank | DIN 6535 HA with h6 | |
| Machining strategy | HPC | |
| Application for type of drilling | for blind holes | |
| ⌀ range | 9.701 mm - 10.200 mm | |
| Flute length Lc | 12 mm | |
| Overhang L1 | 80 mm | |
| Overall length L | 120 mm | |
| Number of cutting edges Z | 6 | |
| Shank ⌀ Ds | 10 mm | |
| Feed f in cast alu | 1.8 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm | |
| Colour ring | yellow | |
| Series | Master Alu | |
| Configurable tolerances | A; B; C; CD; D; E; EF; F; FG; G; H; I; J; JS; O; L; M; N; O; P; Q; R; S; T; U; V; W; X; ZC; Z; ZA; ZB; ZC | |
| Configurable qualities | 6; 7; 8; 9; 10; 11; 12; 13 | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164405 10 | |
| EAN / GTIN | 4062406283995 | |
| Manufacturer number | 164405 10 |
Application Table
N
250
N
250
N
250
Description
Version:
Special HPC reamers of the latest generation, for machining aluminium, with improved tooth geometry and further developed carbide substrate. Extra-short teeth for increased cutting performance values. Optimised cooling strategy with radially arrangedcoolant outlets aligned directly to the teeth. Version suitable for NC with straight shank ⌀ for standard arbors especially in hydraulic chucks or high precision collet chucks. Very high concentricity and process reliability due to unequal spacing of the teeth and special profile of the round chamfer width.
Version with DLC coating ta-C.
Tolerance specifications:
Configurable: Reamers finish ground to match your specification.
H7: Version to DIN1420 for H7 bore tolerance.
Version with DLC coating ta-C.
Tolerance specifications:
Configurable: Reamers finish ground to match your specification.
H7: Version to DIN1420 for H7 bore tolerance.
Application:
Special version for blind holes.
Attention:
Updated coating with colour change from anthracite DLC to rainbow DLC with comparable or better performance.