{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide NC machine reamer Configurable, uncoated, Nominal ⌀ DC: 13mm
Article no.: 164345 13
Article code:
Click to enlarge image
Click to enlarge image
Even number of teeth with irregular spacing − teeth are exactly opposite each other; e. g. teeth 1 and 5.
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Standard: DIN 8093
- Through-coolant: no
- Shank: DIN 6535 HA with h6
- Application for type of drilling: for through holes
Product details
Technical Data
| Nominal ⌀ DC | 13 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 8093 | |
| Through-coolant | no | |
| Shank | DIN 6535 HA with h6 | |
| Application for type of drilling | for through holes | |
| ⌀ range | 12.210 mm - 13.200 mm | |
| Flute length Lc | 44 mm | |
| Overhang L1 | 104 mm | |
| Overall length L | 151 mm | |
| Number of cutting edges Z | 8 | |
| Shank ⌀ Ds | 12 mm | |
| Feed f in steel < 1100 N/mm2 | 0.18 mm/rev. | |
| Reaming oversize in diameter | 0.2 mm - 0.3 mm | |
| Shank tolerance | h6 | |
| Colour ring | green | |
| Configurable tolerances | C; CD; D; E; EF; F; FG; G; H; I; J; JS; O; L; M; N; O; P; Q; R; S; T; U; V; W; X | |
| Configurable qualities | 5; 6; 7; 8; 9; 10; 11; 12; 13 | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164345 13 | |
| EAN / GTIN | 4045197444844 | |
| Manufacturer number | 164345 13 |
Application Table
N
35
N
30
P
20
P
13
P
10
P
8
P
6
M
10
M
8
S
8
K
8
N
20
Description
Version:
Version suitable for NC DIN 8093-2 with straight shank ⌀ for standard chucking especially in hydraulic chucks or high precision collet chucks. This ensures very high concentricity and process reliability,
The use of GARANT-NC reamers eliminates the need to procure special collets. With long flutes and left-hand helix.
Reamers finish ground to match your specification.
The use of GARANT-NC reamers eliminates the need to procure special collets. With long flutes and left-hand helix.
Reamers finish ground to match your specification.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Lead taper is suitable also for blind holes.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
|
Solid carbide NC machine reamer Configurable, uncoated, Nominal ⌀ DC: 13mm |
|||||
| Number of cutting edges Z | 8 | 8 | 8 | 8 | 8 |
| Overhang L1 | 104 mm | 104 mm | 96 mm | 99 mm | 99 mm |
| Colour ring | green | green | without | green | green |
| Overall length L | 151 mm | 151 mm | 152 mm | 150 mm | 150 mm |
| Nominal ⌀ DC | 13 mm | 13 mm | 13 mm | 13 mm | 13 mm |
| Application for type of drilling | for through holes | for through hole | for through hole | for through holes | for through holes |
| Type of product | Phillips bit | Phillips bit | Phillips bit | Phillips bit | Phillips bit |