{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer H7 5 mm
Article no.: 164000 5
Article code:
- Tolerance: H7
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
Product details
Technical Data
| Nominal ⌀ DC | 5 mm | |
| Coating | uncoated | |
| Tolerance | H7 | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 23 mm | |
| Overhang L1 | 63 mm | |
| Overall length L | 133 mm | |
| Number of cutting edges Z | 6 | |
| Morse taper MT size | 1 | |
| Feed f in steel < 750 N/mm2 | 0.1 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164000 5 | |
| EAN / GTIN | 4045197091819 | |
| Manufacturer number | 164000 5 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Reamers finish ground for fit H7.
Reamers finish ground for fit H7.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Machine reamer H7 5 mm |
|||
| Number of cutting edges Z | 6 | 6 | 6 |
| Colour ring | without | without | without |
| Nominal ⌀ DC | 5 | 5 | 5 |
| Standard | DIN 208 B | DIN 212 B | DIN 212 B |
| Shank | Morse taper | Plain shank with h9 | Plain shank with h9 |
| Flute length Lc | 23 | 23 | 23 |
| Feed f in steel < 750 N/mm2 | 0.1 | 0.2 | 0.15 |