{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer H7 30 mm
Article no.: 160150 30
Article code:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 30 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 124 mm | |
| Overhang L1 | 150 mm | |
| Overall length L | 247 mm | |
| Number of cutting edges Z | 10 | |
| Shank square □ | 22.4 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160150 30 | |
| EAN / GTIN | 4045197937391 | |
| Manufacturer number | 160150 30 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.