{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine tap HSS-E-PM 30X1,5
Article no.: 137055 30X1,5
Article code:
- Thread type: MF
- Flank angle: 60
- Tool material: HSS E PM
- Standard: DIN 374
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M30×1.5 | |
| Coating | vaporised | |
| Thread type | MF | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | DIN 374 | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2X 6HX | |
| Taper lead form | C | |
| Helix angle | 20 degrees | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2×D for blind holes | |
| Cutting direction | right-hand | |
| Thread pitch | 1.5 mm | |
| Overall length L | 150 mm | |
| Shank ⌀ Ds | 22 mm | |
| Shank square □ | 18 mm | |
| Tapping hole ⌀ | 28.5 mm | |
| Thread ⌀ | 30 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 4 | |
| Colour ring | pink | |
| Number of cutting edges Z | 4 | |
| Thread depth | 60 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 137055 30X1,5 | |
| EAN / GTIN | 4045197585509 | |
| Manufacturer number | 137055 30X1,5 |
Application Table
P
18
P
9
P
3
S
4
Description
Version:
Surface vaporised for reduced edge build-up.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Machine tap HSS-E-PM 30X1,5 |
|||||
| Colour ring | pink | green | blue | green | red |
| Thread type | MF | MF | MF | MF | MF |
| Thread size | M30×1.5 | M30×1.5 | M30×1.5 | M30×1.5 | M30×1.5 |
| Cutting direction | right-hand | right-hand | right-hand | right-hand | right-hand |
| Tool material | HSS E PM | HSS E PM | HSS E PM | HSS E | HSS E PM |
| Helix angle | 20 | 40 | 45 | 40 | 40 |
| Application for type of drilling | up to 2×D for blind holes | up to 2.5×D for blind holes | up to 3×D for through holes | up to 2.5×D for blind holes | up to 2×D for blind holes |