{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine tap HSS-E-PM M10
Article no.: 135760 M10
Article code:
- Thread type: M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: DIN 371
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M10 | |
| Coating | TiCN | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | DIN 371 | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2X 6HX | |
| Taper lead form | C | |
| Helix angle | 15 degrees | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2×D for blind holes | |
| Cutting direction | right-hand | |
| Thread pitch | 1.5 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 10 mm | |
| Shank square □ | 8 mm | |
| Tapping hole ⌀ | 8.5 mm | |
| Thread ⌀ | 10 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 3 | |
| Colour ring | pink | |
| Number of cutting edges Z | 3 | |
| Thread depth | 20 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 135760 M10 | |
| EAN / GTIN | 4045197077592 | |
| Manufacturer number | 135760 M10 |
Application Table
P
23
P
13
P
7
S
5
Description
Version:
Sturdy design, with 15° right-hand chip flutes.
For use with emulsion (fat content minimum 8%).
For use with emulsion (fat content minimum 8%).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Machine tap HSS-E-PM M10 |
|||
| Number of clamping slots | 3 | 3 | 4 |
| Colour ring | pink | red | white |
| Thread standard | DIN 13 | DIN 13 | DIN 13 |
| Tapping hole ⌀ | 8.5 mm | 8.5 mm | 8.5 mm |
| Cutting direction | right-hand | right-hand | right-hand |
| Tolerance class | ISO 2X 6HX | ISO 2X 6HX | ISO 2X 6HX |
| Application for type of drilling | up to 2×D for blind holes | up to 1.5×D for blind holes; up to 1.5×D for through holes | up to 3×D for blind holes; up to 3×D for through holes |