{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Tap machine tap extra long HSS-E-PM G1/8
Article no.: 133333 G1/8
Article code:
- Thread type: G
- Flank angle: 55
- Tool material: HSS E PM
- Norm: Manufacturer’s standard
- Taper lead form: B
Product details
Technical Data
| Serie | Master Tap | |
| Thread size | G1/8 | |
| Coating | AlTiX | |
| Thread type | G | |
| Flank angle | 55 degrees | |
| Tool material | HSS E PM | |
| Norm | Manufacturer’s standard | |
| Taper lead form | B | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 3×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0.907 mm | |
| Threads per inch | 28 | |
| Thread ⌀ | 9.73 mm | |
| Overall length L | 180 mm | |
| Shank ⌀ Ds | 7 mm | |
| Shank square □ | 5.5 mm | |
| Tapping hole ⌀ | 8.8 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 3 | |
| Colour ring | green | |
| Number of cutting edges Z | 3 | |
| Thread depth | 29.19 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 133333 G1/8 | |
| EAN / GTIN | 4062406208608 | |
| Manufacturer number | 133333 G1/8 |
Application Table
N
24
N
28
N
16
P
24
P
24
P
20
P
10
P
6
M
8
M
6
K
16
N
20
Description
Version:
GARANT Master Tap Universal taps, designed for use in a wide spectrum of materials with high process reliability.
With extra-long shank
- HSS-E-PM tool material for maximum wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum swarf evacuation.
With extra-long shank
Advantage:
Designed for tapping threads where access is difficult.
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).