{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HOLEX Pro Steel solid carbide drill, Weldon shank DIN 6535 HB 14,8 mm
Article no.: 123104 14,8
Article code:
Click to enlarge image
Weldon shank DIN 6535 HB
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Version: 8×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Series | Pro Steel | |
| Nominal ⌀ DC | 14.8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Version | 8×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 135 degrees | |
| recommended maximum drilling depth L2 | 129.8 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 152 mm | |
| Overall length L | 203 mm | |
| Shank ⌀ Ds | 16 mm | |
| Feed f in steel < 900 N/mm2 | 0.23 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 123104 14,8 | |
| EAN / GTIN | 4045197962034 | |
| Manufacturer number | 123104 14,8 |
Application Table
N
250
N
200
N
160
P
125
P
115
P
95
P
90
P
65
M
35
M
30
K
100
K
65
Description
Version:
HOLEX Pro Steel:
Straight major cutting edges and a special flute profile ensure good chip evacuation. The robust cutting edge geometry ensures high-performance drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and extremely wear-resistant coating.
Straight major cutting edges and a special flute profile ensure good chip evacuation. The robust cutting edge geometry ensures high-performance drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and extremely wear-resistant coating.
Note:
Flute length LC = L2 + 1.5 × DC.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
|
HOLEX Pro Steel solid carbide drill, Weldon shank DIN 6535 HB 14,8 mm |
|||
| Number of cutting edges Z | 2 | 2 | 2 |
| Version | 8×D | 8×D | 12×D |
| Colour ring | green | green | green |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Shank ⌀ Ds | 16 | 16 | 16 |
| recommended maximum drilling depth L2 | 129.8 | 129.8 | 185.8 |