{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill set HSS-E No. 114400 as refill set, uncoated, Type: 1-10
Article no.: 115300 1-10
Article code:
- Tool material: HSS E
- Standard: DIN 338
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 130
Product details
Technical Data
| Drill range | 1 mm - 10 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 338 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 130 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| Number of drills | 19 | |
| Incremental steps of drills | 0.5 mm | |
| with case | no | |
| Colour ring | red | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 115300 1-10 | |
| EAN / GTIN | 4045197024862 | |
| Manufacturer number | 115300 1-10 |
Application Table
P
40
P
30
P
25
P
10
P
8
H
8
M
12
M
8
S
5
K
25
N
80
Description
Version:
Composed of jobber drills DIN 338.
Profile ground: high radial run-out and pitch accuracy, as well as precise point grinding. Drill for series production use.
Reinforced core, bright finish.
With point geometry shape C from size 2 mm.
Profile ground: high radial run-out and pitch accuracy, as well as precise point grinding. Drill for series production use.
Reinforced core, bright finish.
With point geometry shape C from size 2 mm.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||
|---|---|---|---|---|---|---|---|---|---|
Jobber drill set HSS-E No. 114400 as refill set, uncoated, Type: 1-10 |
|||||||||
| Number of drills | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 |
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Coating | uncoated | TiN | uncoated | TiN | TiN | uncoated | uncoated | uncoated | uncoated |
| Incremental steps of drills | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm |
| Colour ring | red | without | yellow | without | without | red | without | without | without |
| Shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Three drive flats shank; Plain shank | Plain shank |
| Point angle | 130 degrees | 130 degrees | 130 degrees | 118 degrees | 118 degrees | 130 degrees | 130 degrees | 130 degrees | 130 degrees |