{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
NC spotting drill HSS-E-PM 90° N 20 mm
Article no.: 112060 20
Article code:
- Tool material: HSS E PM
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h6
- Point angle: 90
Product details
Technical Data
| Shank tolerance | h6 | |
| Nominal ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | HSS E PM | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h6 | |
| Point angle | 90 degrees | |
| Shank | DIN 1835 B to h6 | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| Flute length Lc | 40 mm | |
| Overall length L | 131 mm | |
| Shank ⌀ Ds | 20 mm | |
| Feed f in steel < 900 N/mm2 | 0.07 mm/rev. | |
| Colour ring | without | |
| Type of product | Spotting drill |
Identification numbers & Classifications
| Article number | 112060 20 | |
| EAN / GTIN | 4045197741578 | |
| Manufacturer number | 112060 20 |
Application Table
N
96
N
62
N
55
P
55
P
42
P
35
P
14
P
12
M
18
M
13
S
8
K
35
N
112
Description
Version:
≥ ⌀ 6 mm with drive flat to DIN 1835-B.
Precision centred ground point with thin chisel edge - gives easy spot drilling and high accuracy of the centre hole form. Very sturdy due to short flutes.
High-performance NC spotting drill.
Tool substrate made of sintered powder metallurgy for applications demanding high standards of tool life and accurate centring. Very good wear resistance in stainless steels.
Precision centred ground point with thin chisel edge - gives easy spot drilling and high accuracy of the centre hole form. Very sturdy due to short flutes.
High-performance NC spotting drill.
Tool substrate made of sintered powder metallurgy for applications demanding high standards of tool life and accurate centring. Very good wear resistance in stainless steels.
Note:
Use speed for the actual hole ⌀
(not necessarily the speed for the drill outer ⌀).
(not necessarily the speed for the drill outer ⌀).