{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Centre drill HSS R 2 mm
Article no.: 111350 2
Article code:
- Tool material: HSS
- Standard: DIN 333
- Type: R
- Tolerance nominal ⌀: k12
- Countersink angle with radius: 60
Product details
Technical Data
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 333 | |
| Type | R | |
| Tolerance nominal ⌀ | k12 | |
| Countersink angle with radius | 60 degrees | |
| Cutting direction | right-hand | |
| Shank | Parallel shank to h7 | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| Nominal ⌀ DC | 2 mm | |
| for workpiece ⌀ | 15 − 20 mm | |
| Shank ⌀ Ds | 5 mm | |
| Shank tolerance | h7 | |
| Overall length L | 40 mm | |
| Feed f in steel < 900 N/mm2 | 0.02 mm/rev. | |
| Colour ring | without | |
| Type of product | Centre drill |
Identification numbers & Classifications
| Article number | 111350 2 | |
| EAN / GTIN | 4045197000644 | |
| Manufacturer number | 111350 2 |
Application Table
N
70
N
45
P
40
P
30
P
25
P
10
P
8
N
80
Description
Version:
Ground from solid and relief ground, spiral fluted.
Centre drill with radius form R:
Centre drill with radius form R:
- The radius curve eliminates the sharp transition from drill point to countersink angle that is present on form A, so the risk of fracture is reduced.
- In the event of angular misalignment of the lathe centre, the ring bearing face avoids the component running only on the external or internal edge of the bearing face. Even if the lathe centres are not in line, good support is provided.