Till ToolScout{{ name }}
Art-nr {{ combinedCodeWithHighlight }}
Artikelnummer:
EAN/GTIN:
Tillverkarens nummer:
Momentskruvdragare med skala, hållare för utbytbara klingor 200 cNm
Art-nr: 659957 200
Artikelnummer:
- Direction of tightening: Högerdragning
- Torque measuring accuracy: ±6
- Test certificate: Provningsprotokoll från tillverkaren
Produktdetaljer
Tekniska data
| maximum torque | 200 cNm | |
| Direction of tightening | Högerdragning | |
| Torque measuring accuracy | ±6 % | |
| Test certificate | Provningsprotokoll från tillverkaren | |
| Overall length L | 124 mm | |
| Torque range | 40 cNm - 200 cNm | |
| Torque range | 0.4 Nm - 2 Nm | |
| Scale graduation, 1 graduation = | 5 cNm | |
| suitable interchangeable blades | 6 mm | |
| Display | analog | |
| Release signalling | akustiskt; haptisk | |
| Trigger principle | mechanical short travel release | |
| Connection format | exchangeable blade | |
| Measurement technology | mekanisk | |
| Fast inställt vridmoment | nej | |
| Data can be recorded | no | |
| Setting the trigger value | with adjustment scale | |
| Feedback | triggering | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Produktslag | Momentskruvdragare |
Identifieringsnummer och klassificeringar
| Artikelnummer | 659957 200 | |
| EAN/GTIN | 7610733291700 | |
| Tillverkarens nummer | 8317.A 0,4-2,0 NM |
Benämning
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.