Till ToolScout{{ name }}
Art-nr {{ combinedCodeWithHighlight }}
Artikelnummer:
EAN/GTIN:
Tillverkarens nummer:
Spärrhuvud, smalt, med djupt placerad omkopplare 2-1/2 tum
Art-nr: 657640 2-1/2
Artikelnummer:
- Utbytbart verktyg: Insticksverktyg
- fyrkantsfäste: 1/2
- Material: Kromvanadinstål
Produktdetaljer
Tekniska data
| Utbytbart verktyg | Insticksverktyg | |
| fyrkantsfäste | 1/2 tum | |
| bredd B | 40 mm | |
| höjd h | 14,3 mm | |
| kontinuerlig belastbarhet | 320 Nm | |
| stickmått S | 36 mm | |
| Antal tänder | 40 | |
| insticksskaft | 14×18 mm | |
| Material | Kromvanadinstål | |
| Produktslag | Spärrhuvud |
Identifieringsnummer och klassificeringar
| Artikelnummer | 657640 2-1/2 | |
| EAN/GTIN | 4000896179701 | |
| Tillverkarens nummer | 6604-1 |
Benämning
Version:
Drop-forged; all plug-in heads = Rectangular shank with spring retaining pin. This ensures a solid and secure fit of the plug-in head in the torque wrench.
Slim plug-in ratchet with recessed reverser.
Slim plug-in ratchet with recessed reverser.
Material:
Chrome vanadium steel, chrome-plated.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Suitable for:
Torque wrench with rectangular sockets.
Note:
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!
Further plug-in heads with rectangular plug-in shank 22 × 28 mm available on request.
Further plug-in heads with rectangular plug-in shank 22 × 28 mm available on request.