Till ToolScout{{ name }}
Art-nr {{ combinedCodeWithHighlight }}
Artikelnummer:
EAN/GTIN:
Tillverkarens nummer:
Torque wrench with ratchet 500 N·m
Art-nr: 657272 500
Artikelnummer:
Klicka för att förstora bilden
Klicka för att förstora bilden
For a description of the legend, see description text.
- Direction of tightening: For right and left-hand tightening
- Torque measuring accuracy: ±4
- Test certificate: Manufacturer’s test certificate
Produktdetaljer
Tekniska data
| maximum torque | 500 Nm | |
| Direction of tightening | For right and left-hand tightening | |
| Torque measuring accuracy | ±4 % | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 830 mm | |
| Torque range | 100 Nm - 500 Nm | |
| Scale graduation, 1 graduation = | 5 Nm | |
| Weight | 3,800 g | |
| Square drive | 3/4 in | |
| Display | analogue | |
| Release signalling | akustisk; haptisk | |
| Ratchet | with push-through square | |
| Trigger principle | mechanical short-travel release | |
| Connection format | Push-through square drive (ratchet) | |
| Measurement technology | mechanical | |
| Data can be recorded | no | |
| Setting the trigger value | with adjustment scale | |
| Feedback | triggering | |
| Reversible reading | Nm; lbfft | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Lever length including factory calibration reference dimension [l3] | 681 mm | |
| Type of product | Torque Wrench |
Identifieringsnummer och klassificeringar
| Artikelnummer | 657272 500 | |
| EAN/GTIN | 4045197892027 | |
| Tillverkarens nummer | 657272 500 |
Benämning
Version:
Robust torque wrench, adjustable with micrometer scale, with protection against accidental changes to the setting.
Integral ratchet to accept sockets.
Units of measure: Nm, lbfft.
Integral ratchet to accept sockets.
Units of measure: Nm, lbfft.
Ratchet with push-through square drive pin and retaining pin, for right-hand and left-hand tightening.
Function:
On reaching the set torque value the wrench triggers giving a ″signal″ (audible and perceptible) and is then immediately ready for use again.
Application:
For small to medium series.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
±4 % of the displayed value.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Nedladdningar och dokument
Jämför med liknande produkter
Den här artikeln |
Rekommendationer |
||
|---|---|---|---|
|
Torque wrench with ratchet 500 N·m
på begäran
I lager
37 styck i lager
£409.77
plus lagstadgad moms
Priser plus leveranskostnader
|
|||
| Reversible reading | Nm ;lbfft | Nm | Nm |
| Direction of tightening | For right and left-hand tightening | For right and left-hand tightening | For right and left-hand tightening |
| Release signalling | akustisk ;haptisk | akustisk ;haptisk | akustisk ;haptisk |
| Data can be recorded | no | no | no |
| Overall length L | 830 | 1,021 | 935 |
| Test certificate | Manufacturer’s test certificate | Manufacturer’s test certificate | Manufacturer’s test certificate |
| Feedback | triggering | triggering | triggering |