{{ name }}
Art-nr {{ combinedCodeWithHighlight }}
Artikelnummer:
EAN/GTIN:
Tillverkarens nummer:
Dragtapp 45° tätad 40
Art-nr: 308765 40
Artikelnummer:
- Dragtapp norm: MAS 403
Produktdetaljer
Tekniska data
| Adecuado para cono de gran inclinación | 40 | |
| Hålegenskap | med hål | |
| Dragtapp norm | MAS 403 | |
| ⌀ collar D | 23 mm | |
| ⌀ cabeza D1 | 15 mm | |
| Longitud total L | 60 mm | |
| L1 | 35 mm | |
| Rosca M | M16 | |
| Par de apriete máximo | 50 Nm | |
| Adecuado para cono de gran inclinación con código de colores | SK 40 | |
| Ancho de llave | 19 mm | |
| Produktslag | Dragtappar |
Identifieringsnummer och klassificeringar
| Artikelnummer | 308765 40 | |
| EAN/GTIN | 4045197532756 | |
| Tillverkarens nummer | 308765 40 |
Benämning
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also JIS B 6339 (MAS-BT) / ISO 7388-2.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.