{{ name }}
Art-nr {{ combinedCodeWithHighlight }}
Artikelnummer:
EAN/GTIN:
Tillverkarens nummer:
KUB Pentron® indexable drill ABS® shank 19 mm
Art-nr: 236603 19
Artikelnummer:
- Drill depth for indexable insert drill up to: 4×D
- Shank: ABS
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Produktdetaljer
Tekniska data
| Series | KUB Pentron® | |
| Nominal ⌀ D | 19 | |
| Drill depth for indexable insert drill up to | 4×D | |
| Shank | ABS | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 76 mm | |
| for inch ⌀ | 3/4 in | |
| Overhang LA | 108 mm | |
| ABS® shank ⌀ Ds | 50 mm | |
| ISO code indexable insert | SOGX 060206 18-... | |
| Pack of insert screws | 239652 6IP2 (1.0 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identifieringsnummer och klassificeringar
| Artikelnummer | 236603 19 | |
| EAN/GTIN | 4047109181472 | |
| Tillverkarens nummer | U44 51900 |
Benämning
Version:
Bore tolerance: D − 0.1 / + 0.3
Application:
Note:
- For use only under stable machining conditions.
- Version 2×D and 3×D with ABS® shank available on request.
- Offset-axis drilling up to Vmax = 0.25 mm.
- Maximum ⌀ = D + 0.5 mm achievable by offsetting.
- Version with PSC shank available on request.