{{ name }}
Art-nr {{ combinedCodeWithHighlight }}
Artikelnummer:
EAN/GTIN:
Tillverkarens nummer:
HiPer-Drill cutter insert m7 16 mm
Art-nr: 231645 16
Artikelnummer:
- Snijmateriaal: HM
- Point angle: 160
- Use for drilling: Drilling through a stack
- Semi-standaard: ja
Produktdetaljer
Tekniska data
| Series | HiPer-Drill | |
| ⌀ D | 16 mm | |
| Soort | HB3040 | |
| Snijmateriaal | HM | |
| Point angle | 160 degrees | |
| for base body size | 16 | |
| Feed f in steel < 750 N/mm2 | 0.26 mm/rev. | |
| Use for drilling | Drilling through a stack | |
| Semi-standaard | ja | |
| Aantal snijkanten Z | 2 | |
| Number of changes/inserts | 1 | |
| Coating | TiAlN | |
| Producttype | Snij-inzetdeel voor het boren |
Identifieringsnummer och klassificeringar
| Artikelnummer | 231645 16 | |
| EAN/GTIN | 4062406162795 | |
| Tillverkarens nummer | 231645 16 |
Användningstabell
P
140
P
120
P
100
K
80
Benämning
Version:
Vee ground cutter inserts for precise positioning and stable seating.
Concentricity when assembled ≤ 20 µm. For holes up to IT9 accuracy.
Special pyramidal point geometry, optimal spot drilling – even with unstable conditions and long tool overhangs.
Such as when processing sheet metal and steel girders. Also suitable for stack drilling.
Concentricity when assembled ≤ 20 µm. For holes up to IT9 accuracy.
Special pyramidal point geometry, optimal spot drilling – even with unstable conditions and long tool overhangs.
Such as when processing sheet metal and steel girders. Also suitable for stack drilling.
Note:
1×D maximum drilling depth without through-coolant.
Cutting data applies for the base body 5×D.
Drill pilot holes exclusively with cutter insert of the same type.
Cutting data applies for the base body 5×D.
Drill pilot holes exclusively with cutter insert of the same type.