{{ name }}
Cod articol {{ combinedCodeWithHighlight }}
Codul articolului:
EAN / GTIN:
Număr producător:
Perie de şlefuire POLINOX PNL 3025/6 A
Cod articol: 4007220087923
Codul articolului:
Vă rugăm să țineți cont de termenul de livrare și de recomandări:
Comandăm acest articol pentru dvs. direct de la producător, deoarece nu face parte din gama noastră principală și, prin urmare, nu este în stocul nostru.
InfoDetalii despre produs
Date tehnice
| Produkto rūšis | Grinding point |
Numere de identificare și clasificări
| Cod articol | 4007220087923 | |
| EAN / GTIN | 4007220087923 | |
| Număr producător | 44653280 | |
| L-Număr | L51050 789 |
Descriere
Aprašymas:
POLINOX mounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive flaps are arranged radially. A long tool life is achieved through the dense packing of the flaps. The tool is particularly used for surface work.
Požymis:
- RPM, max.: 20000 RPM
- RPM, optimum: 10000 RPM
- Width, metric: 25 mm
- Abrasive: Aluminium oxide A
- Dia. external, metric: 30 mm
- Dia. shank, metric: 6 mm
- Grit size: 280
- Length, shank: 40
Privalumai:
- Highly flexible, enabling optimal adjustment to the contour.
- Cool grinding and low thermal load on the workpiece.
- The open structure and high flexibility of the non-woven material prevents tool clogging.
Paskirtis:
- Recommendations for use: For the best results, use at a recommended cutting speed of 10-20 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
- Applications: Cleaning; Deburring; Step-by-step fine grinding; Roughening; Structuring (matt finishing, brush matting and satin finishing); Surface work
- Drive types: Flexible shaft drive; Straight grinder
Apdirbama medžiaga:
- Materials that can be worked:
- Aluminium
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Zinc
- Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc
Pastaba:
- The maximum permitted peripheral speed is 32 m/s.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.