Către ToolScout{{ name }}
Cod articol {{ combinedCodeWithHighlight }}
Codul articolului:
EAN / GTIN:
Număr producător:
Cheie dinamometrică DREMOMETRU BZ A+S 16Z 25-120 Nm
Cod articol: 1427075
Codul articolului:
Vă rugăm să țineți cont de termenul de livrare și de recomandări:
Comandăm acest articol pentru dvs. direct de la producător, deoarece nu face parte din gama noastră principală și, prin urmare, nu este în stocul nostru.
InfoDetalii despre produs
Date tehnice
| maksimalus sukimo momentas | 120 Nm | |
| Serija | DREMOMETER | |
| Produkto rūšis | Torque Wrench |
Numere de identificare și clasificări
| Cod articol | 1427075 | |
| EAN / GTIN | 4002805927274 | |
| Număr producător | 1427075 | |
| L-Număr | L60160 5092 |
Descriere
Aprašymas:
- Technical advantage/Function:
- Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustment, thereby representing more process reliability of the user
- Classified according to DIN EN ISO 6789-2:2017 Type II Class A, incl. traceable test certificate, calibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard
- Lightweight yet robust (as the housing is made of an aluminium alloy) and resilient, very workshop-friendly
- Depending on the application, access is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket).
- Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwise, inaccuracies can evolve (except for model DXZ where the DREMOMETER has been calibrated and adjusted using the extension tube)
- Operation only with end fittings with standardised depth gauges, otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original GEDORE accessories.
- Large drive cross-section transfers maximum torques
- Extremely low wear attributable to reduced forces in a lever mechanism
- Forged lever chain from our group own quality forge
- Maximum precision even when subjected to extreme continuous use
- Easy operation - fast and safe torque tightening
- Easy adjustment thanks to attractive adjusting button secured against loss at the end of the handle
- With certificate acc. to DIN EN ISO 6789-2:2017, traceable via in-house DAkkS laboratory to national standards
- Pre-set DREMOMETER for serial production wherever the same value always needs to be applied
- If ordering, please specify the N·m value - if a fixed factory pre-setting is desired (price on request)
Požymis:
- 1000 V insulated: no
- Application range:
- Assembly
- Series assembly
- Fabrication
- Calibration length [mm]: 412 mm
- Distance housing - centre drive [mm]: 16 mm
- Drive type/drive: Drive end
- Fixed setting: no
- Fuse: Pin lock
- Head height 1 [mm]: 30 mm
- Head width 1 [mm]: 35,0 mm
- Lever length drive side [mm]: 38 mm
- Lever length handle side [mm]: 439,5 mm
- Material: Aluminium alloy
- Precision: +/- 3 %
- REACH registration available: no
- Release mechanism: short travel release
- Scale division [lbf ft]: 5 lbf ft
- Scale division [Nm]: 5 Nm
- Scale division: 5
- Scale type: Dual
- Stitch size [metric]: 32,0 mm
- Target groups:
- Automotive
- Industrial
- Construction & Commercial
- Military
- Machinery
- Railway
- Oil & Gas
- Test certificate: DIN EN ISO 6789-2:2017
- Tightening direction: Left and right
- Torque range (min./max.) [lbf ft]: 18 lbf ft - 90 lbf ft
- Torque range (min./max.) [Nm]: 25 Nm - 120 Nm
- Torque spanner type:
- BZ
- A+S
- Total height [mm]: 30 mm
- Total length [mm]: 477,5 mm
- Total width [mm]: 35 mm
- VDE certified: no
- Width of receiver [mm]: 16 mm