{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
Perno de apriete 45° junta tórica 50
Número de artículo: 308760 50
Código del artículo:
- Norma perno de apriete: MAS 403
Detalles de producto
Datos técnicos
| suitable for steep tapers | 50 | |
| Características de perforación | sin taladro | |
| Norma perno de apriete | MAS 403 | |
| Collar ⌀ D | 38 mm | |
| Head ⌀ D1 | 23 mm | |
| Overall length L | 85 mm | |
| L1 | 45 mm | |
| Thread M | M24 | |
| maximum tightening torque | 150 Nm | |
| suitable for taper arbors with colour code | SK 50 | |
| Width across flats | 30 mm | |
| Tipo de producto | Tirante |
Números de identificación y clasificaciones
| Número de artículo | 308760 50 | |
| EAN / GTIN | 4045197223883 | |
| Número del fabricante | 308760 50 |
Descripción
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also JIS B 6339 (MAS-BT) / ISO 7388-2.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.