To The Toolscout{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Torque screwdriver with scale, to take interchangeable blades 200 cNm
Article no.: 659957 200
Artikkelkode:
Click to enlarge image
Click to enlarge image
6 mm blade
- Dragriktning: Högerdragning
- mätnoggrannhet vridmoment: ±6
- Provningsprotokoll: Provningsprotokoll från tillverkaren
Produktinformasjon
Technical Data
| maximalt vridmoment | 200 cNm | |
| Dragriktning | Högerdragning | |
| mätnoggrannhet vridmoment | ±6 % | |
| Provningsprotokoll | Provningsprotokoll från tillverkaren | |
| totallängd L | 124 mm | |
| momentintervall | 40 cNm - 200 cNm | |
| momentintervall | 0,4 Nm - 2 Nm | |
| skalgradering 1 delstreck = | 5 cNm | |
| passande utbytesklingor | 6 mm | |
| visning | analog | |
| Utlösningssignal | akustiskt; haptisk | |
| Utlösningsprincip | mekanisk kortvägsutlösning | |
| Anslutningsform | utbytbar klinga | |
| Mätteknik | mekanisk | |
| Fast inställt vridmoment | nej | |
| Loggbara data | nej | |
| Inställning av utlösningsvärdet | med inställningsskala | |
| Feedback | utlösande | |
| mätmetod | vridmoment | |
| Utlösningsvärdets justerbarhet | ställbar | |
| Norm | DIN EN ISO 6789 | |
| Produktslag | Momentskruvdragare |
Identification numbers & Classifications
| Artikkelkode | 659957 200 | |
| EAN / GTIN | 7610733291700 | |
| Manufacturer number | 8317.A 0,4-2,0 NM |
Beskrivelse
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.