To The Toolscout{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
BIT ratchet socket plug-in head 1/4 in
Article no.: 657932 1/4
Artikkelkode:
- Exchangeable tool: Insticksverktyg
Produktinformasjon
Technical Data
| Exchangeable tool | Insticksverktyg | |
| bredd B | 17,5 mm | |
| höjd h | 12.4 mm | |
| kontinuerlig belastbarhet | 15 Nm | |
| No. of teeth | 60 | |
| Pitch S | 17.5 mm | |
| insticksskaft | 9×12 mm | |
| Bitshållare | 1/4 tum | |
| Material | Kromvanadinstål | |
| Spärrnyckel, omkopplingsbar | yes | |
| Verktyg med spärrfunktion | yes | |
| Produktslag | Insticksverktyg, bitshållare |
Identification numbers & Classifications
| Artikkelkode | 657932 1/4 | |
| EAN / GTIN | 4062406229641 | |
| Manufacturer number | 657932 1/4 |
Beskrivelse
Version:
Drop-forged; all plug-in heads = Rectangular shank with spring retaining pin. This ensures a solid and secure fit of the plug-in head in the torque wrench.
Ratchet reversible for clockwise / anticlockwise tightening.
Ratchet reversible for clockwise / anticlockwise tightening.
Application:
To take bits with hexagon shank to DIN ISO 1173 C 6.3 and E 6.3 (1/4 inch).
Material:
Chrome vanadium steel, chrome-plated.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Suitable for:
Torque wrench with rectangular sockets.
Note:
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!
The rated load on this plug-in head is limited to the corresponding jaw width, and may be less than that of the torque wrench.
The rated load on this plug-in head is limited to the corresponding jaw width, and may be less than that of the torque wrench.