To The Toolscout{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Opzetratel, omschakelbaar met uitwerper QuickRelease 1-1/4 inch
Article no.: 657590 1-1/4
Artikkelkode:
- Utbytbart verktyg: Insticksverktyg
- Square drive: 1/4
Produktinformasjon
Technical Data
| Utbytbart verktyg | Insticksverktyg | |
| Square drive | 1/4 in | |
| Width b | 22 mm | |
| Height h | 14.5 mm | |
| Series | 725QR | |
| Long-term rated loading | 40 Nm | |
| Pitch S | 17.5 mm | |
| No. of teeth | 22 | |
| Plug-in shank | 9×12 mm | |
| Omställbar spärrnyckel | yes | |
| Spärrnyckel med utstötare | yes | |
| Produktslag | Spärrhuvud |
Identification numbers & Classifications
| Artikkelkode | 657590 1-1/4 | |
| EAN / GTIN | 4018754139606 | |
| Manufacturer number | 58253004 |
Beskrivelse
Version:
Drop-forged; all plug-in heads = Rectangular shank with spring retaining pin. This ensures a solid and secure fit of the plug-in head in the torque wrench.
Plug-in reversible ratchet with ejector.
Plug-in reversible ratchet with ejector.
With reversing lever.
Material:
Chrome alloy steel, non-flaking, chrome-plated over nickel.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Suitable for:
Torque wrench with rectangular sockets.
Note:
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!
Further plug-in heads with rectangular plug-in shank 22 × 28 mm available on request.
Further plug-in heads with rectangular plug-in shank 22 × 28 mm available on request.