To The Toolscout{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Momentsleutel-basisapparaat 40 Nm
Article no.: 657410 40
Artikkelkode:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
For a description of the legend, see description text.
- Aanhaalrichting: Rechtsom en linksom aanhalen
- Meetnauwkeurigheid draaimoment: ±4
- Gereedschap verwisselbaar: Opzetstukken
Produktinformasjon
Technical Data
| maximaal draaimoment | 40 Nm | |
| Aanhaalrichting | Rechtsom en linksom aanhalen | |
| Meetnauwkeurigheid draaimoment | ±4 % | |
| Gereedschap verwisselbaar | Opzetstukken | |
| Serie | MANOSKOP® 755 | |
| Totale lengte L | 201 mm | |
| Draaimomentbereik | 4 Nm - 40 Nm | |
| Draaimomentbereik | 4 lbfft - 30 lbfft | |
| Gewicht | 520 g | |
| Afgestelde steekmaat op de momentsleutel [l2] | 17,5 mm | |
| Opname voor opzetstuk | 9×12 mm | |
| Aanduiding ontkoppeling | akoestisch; haptisch | |
| Activeringsprincipe | met kleinere vrije slag, mechanisch | |
| Aansluitingsvorm | voor opsteekgereedschap (rechthoekige opname) | |
| Meettechniek | Mechanisch | |
| Gegevens rapporteerbaar | nee | |
| Instelling van de activeringswaarde | zonder instelschaal (tester nodig) | |
| Feedback | ontkoppelend | |
| Aflezing omschakelbaar | Nm; lbfft | |
| Meetmethode | Draaimoment | |
| Verstelbaarheid activeringswaarde | vooraf ingesteld | |
| Norm | DIN EN ISO 6789 | |
| Hefboomlengte zonder opzetstuk [l1] | 172 mm | |
| Hefboomlengte inclusief fabriekskalibratiesteekmaat [l3] | 189,5 mm | |
| Produktslag | Momentnyckel |
Identification numbers & Classifications
| Artikkelkode | 657410 40 | |
| EAN / GTIN | 4018754031603 | |
| Manufacturer number | 50010004 |
Beskrivelse
Version:
Single-handed torque wrench without a setting scale. Wrench setting using torque analyser. Left-hand tightening by reversing the plug-in head.
Without plug-in head (base model); see No. 657582 − 657590 for suitable plug-in heads.
Without plug-in head (base model); see No. 657582 − 657590 for suitable plug-in heads.
Function:
On reaching the set torque value the wrench triggers giving a “signal”(audible and perceptible) and is then immediately ready for use again.
Application:
For controlled screw tightening etc. to specified torques in batch productions.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.