{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
ET-spännhylsa med radialutjämning för gängskärning och brotschning 2 mm
Article no.: 309445 2
Artikkelkode:
- Norm: Verkstadsnorm
Produktinformasjon
Technical Data
| nom. spänn-⌀ d | 2 mm | |
| fäste | ET 16 | |
| Norm | Verkstadsnorm | |
| Utvändig-⌀ D | 17 mm | |
| totallängd L | 29 mm | |
| Axialkompensation | 0,1 mm | |
| Radialkompensation R gängbearbetning | 0,3 mm | |
| Radialkompensation R brotschning | 0,05 mm | |
| Produktslag | Spännhylsa |
Identification numbers & Classifications
| Artikkelkode | 309445 2 | |
| EAN / GTIN | 4045197782816 | |
| Manufacturer number | 309445 2 |
Beskrivelse
Version:
Hardened and ground.
Advantage:
The radial compensation allows correction of slight centring errors (for the required concentricity and thread or fit quality). Axial compensation of 0.1 mm.
Application:
For tapping and reaming on milling and turning centres.
Suitable for:
All standard ER collet chucks.
Note:
Clamps only the nominal ⌀. Not compatible with the CENTRO P precision ER collet chuck.