{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Pull stud Hurco 45° with fit sealed 40
Article no.: 308802 40
Artikkelkode:
- Dragtapp norm: MAS 403
Produktinformasjon
Technical Data
| suitable for steep tapers | 40 | |
| Dragtapp norm | MAS 403 | |
| Collar ⌀ D | 23 mm | |
| Head ⌀ D1 | 15 mm | |
| Overall length L | 57.15 mm | |
| L1 | 32 mm | |
| Thread M | M16 | |
| maximum tightening torque | 50 Nm | |
| suitable for taper arbors with colour code | SK 40 | |
| Width across flats | 19 mm | |
| Produktslag | Dragtappar |
Identification numbers & Classifications
| Artikkelkode | 308802 40 | |
| EAN / GTIN | 4045197644602 | |
| Manufacturer number | 308802 40 |
Beskrivelse
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also DIN 69871 / ISO 7388-1.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.