{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Artikkelnr.: 308605 50
Dragtapp form A med hål 50 GARANT
Article no.: 308600 50
Artikkelkode:
- Pull stud standard: ISO 7388-3
Produktinformasjon
Technical Data
| suitable for steep tapers | 50 | |
| Hole characteristics | with bore | |
| Pull stud standard | ISO 7388-3 | |
| Collar ⌀ D | 36 mm | |
| Head ⌀ D1 | 28 mm | |
| Overall length L | 74 mm | |
| L1 | 34 mm | |
| Thread M | M24 | |
| Angle A | 15 degrees | |
| maximum tightening torque | 150 Nm | |
| suitable for taper arbors with colour code | SK 50 | |
| Width across flats | 30 mm | |
| Type of product | Pull Stud |
Identification numbers & Classifications
| Artikkelkode | 308600 50 | |
| EAN / GTIN | 4045197150912 | |
| Manufacturer number | 308600 50 |
Beskrivelse
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.
ISO 7388-3 meets the old standard DIN 69872.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Dragtapp form A med hål 50 GARANT
on request
På lager
374 styck i lager
NOK 180,98
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
879 styck i lager
14,78 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
555 styck i lager
15,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
208 styck i lager
14,78 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Collar ⌀ D | 36 mm | 36 mm | 36 mm | 36 mm |
| Thread M | M24 | M24 | M24 | M24 |
| L1 | 34 mm | 34 mm | 25,55 mm | 25,55 mm |
| maximum tightening torque | 150 Nm | 150 Nm | 150 Nm | 150 Nm |
| Width across flats | 30 mm | 30 mm | 30 mm | 30 mm |
| Hole characteristics | with bore | with bore | with bore | with bore |
| Type of product | Pull Stud | Pull Stud | Pull Stud | Pull Stud |