{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Spårskärinsats med fas H7, TiN, för spårbredd m: 20mm
Article no.: 290363 20
Artikkelkode:
Produktinformasjon
Technical Data
| för spårbredd m | 20 mm | |
| Beläggning | TiN | |
| för passningsnoggrannhet | H7 | |
| Skärbredd w | 20,021 mm | |
| spårdjup d | 6,29 mm | |
| mejseltjocklek b | 18 mm | |
| Fas | 0,2 mm × 45° | |
| Skärmaterial | HSS | |
| Produktslag | Spår- och profilfogverktyg |
Identification numbers & Classifications
| Artikkelkode | 290363 20 | |
| EAN / GTIN | 4045197881519 | |
| Manufacturer number | 290363 20 |
Användningstabell
N
N
N
P
P
P
P
P
M
M
S
K
N
N
Beskrivelse
Version:
With TiN coating.
Suitable for regrinding.
Suitable for regrinding.
Application:
For producing slots according to DIN 6885, DIN 138 and factory standards.
For slot widths with tolerance JS9, use cutter inserts with tolerance H7.
For slot widths with tolerance JS9, use cutter inserts with tolerance H7.
Note:
- Special sizes (slot widths) available on request.
- Detailed application values can be found in our application ToolScout.
From slot width 16 mm it is essential to perform two passes. The first pass must be performed for approx. half the slot width (e.g. 10 mm for a desired slot width of 18 mm). For the first pass it is recommended that a cutter insert without chamfer (290370 – 290379) is used, as this means greater slot depths are possible.