{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Artikkelnr.: 250893 CA125P
Draai-wisselplaat DNMG 150612, voor ruwe bewerking, Soort: CA025P
Article no.: 250893 CA025P
Artikkelkode:
Produktinformasjon
Technical Data
| ISO code indexable insert | DNMG 150612 | |
| Corner radius | 1.2 mm | |
| Grade | CA025P | |
| Tool material | Carbide | |
| Coating | CVD | |
| Main application | P | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | PH | |
| Cutting depth ap | 1 mm - 5 mm | |
| Feed f | 0.25 mm/rev. - 0.8 mm/rev. | |
| Cutting speed vc main application | 70 m/min - 420 m/min | |
| Number of changes/inserts | 4 | |
| Finishing/roughing assignment | Roughing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Artikkelkode | 250893 CA025P | |
| EAN / GTIN | 4960664864430 | |
| Manufacturer number | TMH00203 |
Användningstabell
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Draai-wisselplaat DNMG 150612, voor ruwe bewerking, Soort: CA025P
on request
Inte tillgängligt
Available in 11-14 working days
0 styck i lager
0 pieces available in 11-14 working days
17,18 €
€ 12,00
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
396 styck i lager
|
||||
| Number of changes/inserts | 4 | 4 | 4 | 4 | 4 |
| Corner radius | 1.2 mm | 1.2 mm | 1.2 mm | 1.2 mm | 1.2 mm |
| Finishing/roughing assignment | Roughing | Roughing | Roughing | Roughing | Roughing |
| Cutting conditions | slightly interrupted | slightly interrupted | continuous | heavily interrupted | slightly interrupted |
| Cutting depth ap | 1 mm - 5 mm | 1.5 mm - 6 mm | 1.5 mm - 6 mm | 1.5 mm - 6 mm | 1.8 mm - 6 mm |
| Chip breaker | PH | SG | SG | SG | PR |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |