{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Högmatningsfräs MFH Harrier 25/2 mm
Article no.: 222050 25/2
Artikkelkode:
- Fräsanvändning: Cirkulärfräsning; Ramping; Ramping
- Invändig: ja
- Bearbetningsstrategi: HPC
Produktinformasjon
Technical Data
| Skär-⌀ DC | 25 mm | |
| Antal skär Z | 2 | |
| Skaftutförande | Cylindriskt skaft | |
| Fräsanvändning | Cirkulärfräsning; Ramping; Ramping | |
| Invändig | ja | |
| Bearbetningsstrategi | HPC | |
| ⌀ D3 | 8 mm | |
| maximalt sågdjup ap max | 1,5 mm | |
| maximalt skärdjup ap max vid LD-geometri | 3,5 mm | |
| Utkragningslängd L1 | 60 mm | |
| totallängd Ltot | 140 mm | |
| Skaftdiameter Ds h6 | 25 mm | |
| spiralfräsning ⌀ Dmin | 33 mm | |
| spiralfräsning ⌀ Dmax | 48 mm | |
| Rampningsvinkel αmax | 2,79 grad | |
| Rampningslängd L för αmax | 7,4 mm | |
| Passande vändskär | SOMT.. | |
| Vändskärsstorlek | 10 | |
| Vändskärsskruv | 229717 (15IP; 3,5 Nm) | |
| Inställningsvinkel κ | 10 grad | |
| Produktslag | Kopierfräs |
Identification numbers & Classifications
| Artikkelkode | 222050 25/2 | |
| EAN / GTIN | 4960664707454 | |
| Manufacturer number | THN07610 |
Beskrivelse
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
High feed rate milling cutter MFH Harrier 25/2 mm
on request
På lager
5 styck i lager
US $ 353.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
8 styck i lager
US $ 315.34
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
15 styck i lager
US $ 346.77
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 |
| Milling application | Cirkulärfräsning ;Ramping ;Ramping | Circular milling ;Ramping ;Plunging | Ramping ;Ramping ;Plunging |
| Overall length Ltot | 140 | 200 | 150 |
| suitable indexable insert | SOMT.. | XDM.090416 | XOMU094812 |
| Shank type | Cylindriskt skaft | Plain shank | Plain shank |
| Cutting edge ⌀ DC | 25 | 25 | 25 |
| Ramping angle αmax | 2,79 | 3.29 | 2.74 |