{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Mini-fraise carbure monobloc GARANT Master Steel HPC 0,8 mm
Article no.: 202295 0,8
Artikkelkode:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Produktinformasjon
Technical Data
| Series | Master Steel | |
| Cutting edge ⌀ DC | 0.8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 2 mm | |
| Overall length L | 38 mm | |
| Shank ⌀ Ds | 3 mm | |
| Corner chamfer width at 45° | 0.01 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.003 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.005 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Artikkelkode | 202295 0,8 | |
| EAN / GTIN | 4062406271268 | |
| Manufacturer number | 202295 0,8 |
Användningstabell
N
290
N
240
P
140
P
120
P
100
P
70
P
50
M
90
M
70
S
40
K
85
Beskrivelse
Version:
Extra short cutter for maximum stability. Shank length to DIN for improved support of the tool in the holder. This significantly increases the tool life.
Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it.
Tool for general-purpose machining.
Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it.
Tool for general-purpose machining.
Note:
HB shanks are available at the same price as HA.
For HB shanks use order no. 202297.
For HB shanks use order no. 202297.