{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Konisk precisionsförsänkare med differentialdelning 90°, AlTiCN, Utvändig ⌀: 11,5mm
Article no.: 150389 11,5
Artikkelkode:
- Countersink tip angle: 90
- Tool material: HSS E
- Spacing of the countersink cutting edges: unequal spacing
- Number of cutting edges Z: 3
- Standard: DIN 335 C
Offers
Produktinformasjon
Technical Data
| External ⌀ | 11.5 mm | |
| Coating | AlTiCN | |
| Countersink tip angle | 90 degrees | |
| Tool material | HSS E | |
| Spacing of the countersink cutting edges | unequal spacing | |
| Number of cutting edges Z | 3 | |
| Standard | DIN 335 C | |
| Shank | Parallel shank to h9 | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 2.8 mm | |
| Overall length L | 56 mm | |
| Shank ⌀ Ds | 8 mm | |
| for countersunk screws ISO 2009, 2010, 7046, 7047 | M6 | |
| Feed f in stainless steel < 900 N/mm2 | 0.1 mm/rev. | |
| Shank tolerance | h9 | |
| Colour ring | blue | |
| Pre-drill ⌀ | 2.8 mm | |
| Type of product | Stepped drill and countersink |
Identification numbers & Classifications
| Artikkelkode | 150389 11,5 | |
| EAN / GTIN | 4062406073282 | |
| Manufacturer number | 150389 11,5 |
Användningstabell
N
53
N
40
N
35
P
55
P
30
P
25
P
15
P
12
M
18
M
13
S
13
K
30
N
42
Beskrivelse
Execuţie:
Teşitoare cu 3 tăişuri, detalonate radial.
Spaţiile pentru aşchii sunt rectificate din material solid.
Teşitor de mare precizie, realizat cu toleranţe de fabricaţie mai mici faţă de DIN335-C.
Geometrie specială cu dantură divizată inegal şi tăişuri ascuţite.
Strat de acoperire nou conceput AlTiCN, special pentru oţeluri inoxidabile.
Spaţiile pentru aşchii sunt rectificate din material solid.
Teşitor de mare precizie, realizat cu toleranţe de fabricaţie mai mici faţă de DIN335-C.
Geometrie specială cu dantură divizată inegal şi tăişuri ascuţite.
Strat de acoperire nou conceput AlTiCN, special pentru oţeluri inoxidabile.
Aplicaţie:
Teşitor de precizie pentru realizarea de teşituri fără aşchii, circulare exacte, la 90 °.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Konisk precisionsförsänkare med differentialdelning 90°, AlTiCN, Utvändig ⌀: 11,5mm
on request
På lager
31 styck i lager
NOK 545,58
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
145 styck i lager
38,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | AlTiCN | TiCN |
| Colour ring | blue | mėlyna |
| Standard | DIN 335 C | DIN 335 C |
| Tool material | HSS E | HSS E |
| Shank ⌀ Ds | 8 mm | 8 mm |
| smallest countersink ⌀ for holes from | 2.8 mm | 2,8 mm |
| Type of product | Stepped drill and countersink | Pakopiniai ir kūginiai gilintuvai |