{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
Torque wrench with dial gauge display 280 N·m
Artikelnummer: 655520 280
Klantartikelnummer:
Klik om de afbeelding te vergroten
Klik om de afbeelding te vergroten
For a description of the legend, see description text.
- Aanhaalrichting: Rechtsom en linksom aanhalen
- Meetnauwkeurigheid draaimoment: ±4
- Testrapport: Testrapport van de producent
Productdetails
Technische gegevens
| maximaal draaimoment | 280 Nm | |
| Aanhaalrichting | Rechtsom en linksom aanhalen | |
| Meetnauwkeurigheid draaimoment | ±4 % | |
| Testrapport | Testrapport van de producent | |
| Totale lengte L | 690 mm | |
| Draaimomentbereik | 56 Nm - 280 Nm | |
| Schaalverdeling 1 maatstreep = | 5 Nm | |
| Gewicht | 1.650 g | |
| Aandrijfvierkant | 1/2 inch | |
| Weergave | analoog | |
| Aanduiding ontkoppeling | optisch | |
| Aansluitingsvorm | Aandrijfvierkant (ratel) | |
| Meettechniek | Mechanisch | |
| Gegevens rapporteerbaar | nee | |
| Instelling van de activeringswaarde | Sleepwijzer | |
| Feedback | weergevend | |
| Aflezing omschakelbaar | Nm | |
| Meetmethode | Draaimoment | |
| Verstelbaarheid activeringswaarde | niet verstelbaar | |
| Norm | DIN EN ISO 6789 | |
| Hefboomlengte zonder opzetstuk [l1] | 535 mm | |
| Hefboomlengte inclusief fabriekskalibratiesteekmaat [l3] | 605 mm | |
| Producttype | Momentsleutel |
Identificatienummers en classificaties
| Artikelnummer | 655520 280 | |
| EAN/GTIN | 4045197549969 | |
| Nummer fabrikant | 655520 280 |
Omschrijving
Version:
One-armed; slim design with easily readable dial gauge. Body entirely of steel, chrome-plated with fixed square drive for plug-in heads.
Units of measure: Nm
Units of measure: Nm
Non-slip 2-component handle.
Function:
Actual torque can be read on the gauge whilst working; the final value is held by the memory pointer to be read later.
Application:
For controlled single tightening of screws and for controlled measurements.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.