{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
Electronic torque tool tester “TTT”
Artikelnummer: 654340
Klantartikelnummer:
Klik om de afbeelding te vergroten
Klik om de afbeelding te vergroten
Optional accessories: Calibration device for TST, TTT in conjunction with sensors FMT up to 1500 Nm.
- Aanhaalrichting: Rechtsom aanhalen
- Aansluiting: RS232C-aansluiting
- Testrapport: Testrapport van de producent
Productdetails
Technische gegevens
| Aanhaalrichting | Rechtsom aanhalen | |
| Meetnauwkeurigheid draaimoment | ±0,5 % | |
| Aansluiting | RS232C-aansluiting | |
| Testrapport | Testrapport van de producent | |
| Afleesinstrument breedte | 200 mm | |
| Afleesinstrument hoogte | 150 mm | |
| Afleesinstrument diepte | 180 mm | |
| Gewicht | 1 kg | |
| Energievoorziening | Batterijvoeding | |
| Aantal inbegrepen batterijen | 2 | |
| Artikelnr. inbegrepen batterijen / accu’s | 081560 CR2032 | |
| Producttype | Draaimomenttester |
Identificatienummers en classificaties
| Artikelnummer | 654340 | |
| EAN/GTIN | 5060922231284 | |
| Nummer fabrikant | 43228 |
Omschrijving
Version:
- Robust polyurethane body for fixing to a table or wall.
- Large-format LCD display.
- Pictogram keypad for direct choice of test procedure.
- Interface for connecting an external sensor. When using sensors No. 654350 the measuring range and the calibration parameters are recognised automatically.
- Frequency display for checking of pulsed tools or screwdrivers with slip clutch.
- Target torques with upper and lower tolerance limits can be programmed.
- Serial interface for connection to a printer or PC.
- Power supply: Integral rechargeable battery for approx. 16 hours free-standing use, or 230V mains operation.
- TCS calibration software (freely available after registration at www.norbar.com/Support/Downloads/Software-Download).
Without integral sensor, with connections for 3 external sensors.
Advantage:
Flexible measuring system can be extended to 100,000 Nm. Very easy to use.
Application:
Calibrating torque screwdrivers with adjustment scale or display. Setting and calibrating torque screwdrivers without scale. Setting and calibrating electric or pneumatic screwdrivers with automatic shut-off. Use optional external measurement transducers to calibrate torque wrenches or torque screwdrivers up to 100,000 Nm.
Supplied with:
With UKAS calibration certificate, right-hand.
Note:
Not suitable for impact wrenches.