{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
Pull stud sealed, form A 50
Artikelnummer: 308610 50
Klantartikelnummer:
- Aantrekbouten-norm: ISO 7388-3
Productdetails
Technische gegevens
| Geschikt voor conus | 50 | |
| Boringeigenschap | met boring | |
| Aantrekbouten-norm | ISO 7388-3 | |
| Kraag-⌀ D | 36 mm | |
| Kop-⌀ D1 | 28 mm | |
| Totale lengte L | 74 mm | |
| L1 | 34 mm | |
| Schroefdraad M | M24 | |
| Hoek A | 15 graden | |
| Maximaal aanhaalmoment | 150 Nm | |
| Geschikt voor conus met kleurcode | SK 50 | |
| Sleutelwijdte | 30 mm | |
| Producttype | Aantrekbout |
Identificatienummers en classificaties
| Artikelnummer | 308610 50 | |
| EAN/GTIN | 4045197150936 | |
| Nummer fabrikant | 308610 50 |
Omschrijving
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.
Sealed − with O-ring.
ISO 7388-3 meets the old standard DIN 69872.
Sealed − with O-ring.
Downloads en documenten
Vergelijk met soortgelijke producten
Dit artikel |
Aanbevelingen |
||
|---|---|---|---|
Pull stud sealed, form A 50
op aanvraag
Op voorraad
698 stuks direct leverbaar
£10.43
Excl. BTW
Excl. verzendkosten
|
|||
| Collar ⌀ D | 36 | 36 | 36 |
| Thread M | M24 | M24 | M24 |
| Head ⌀ D1 | 28 | 28 | 28 |
| maximum tightening torque | 150 | 150 | 150 |
| suitable for taper arbors with colour code | SK 50 | SK 50 | SK 50 |
| Angle A | 15 | 15 | 15 |
| Hole characteristics | met boring | with bore | with bore |