• Het artikel kan niet worden besteld vanwege ontbrekende prijzen.

Solid carbide torus cutter R1 0.3 2,5X10 mm

Artikelnummer: 209726 2,5X10
Levertijd ca. 1-2 werkdagen

Levertijden zijn schattingen voor standaardverzending en zijn gebaseerd op de huidige voorraadniveaus, tijd en datum van ontvangst en leveringscapaciteit van de bestelling.

Levertijden zijn niet beschikbaar voor bestellingen van artikelen die door de vervoerder worden verzonden, artikelen die niet op voorraad zijn en artikelen die rechtstreeks bij de fabrikant worden besteld.

Selecteer type en hoeveelheid van het artikel

⌀ DC × L1 (mm) Prijs per stuk incl. BTW
  • Tool material: Solid carbide
  • Standard: Manufacturer’s standard
  • Tolerance nominal ⌀: 0 / −0.005
  • No. of teeth Z: 2
  • Helix angle: 30

Toevoegen aan artikellijst

    Deel dit product

    of kopieer deze link

    Productdetails

    Technische gegevens

    Cutting edge ⌀ DC 2.5 mm
    Coating Diamond
    Tool material Solid carbide
    Standard Manufacturer’s standard
    Tolerance nominal ⌀ 0 / −0.005
    No. of teeth Z 2
    Helix angle 30 degrees
    Direction of infeed horizontal, oblique and vertical
    Cutting width ae for milling operation 0.5×D for side milling; 0.05×D for copy milling
    Shank DIN 6535 HA to h5
    Through-coolant no
    Flute length Lc 2.5 mm
    Corner radius R1 0.3 mm
    Overhang length L1 incl. recess 10 mm
    Recess ⌀ D1 2.41 mm
    Overall length L 50 mm
    Shank ⌀ Ds 4 mm
    Feed fz for side milling in graphite 0.035 mm
    Feed fz for copy milling in graphite 0.035 mm
    Correction factor ap corr 1
    Colour ring black
    Type of product Torus cutter

    Identificatienummers en classificaties

    Artikelnummer 209726 2,5X10
    EAN/GTIN 4045197919250
    Nummer fabrikant 209726 2,5X10

    Toepassingstabel

    PVDF GF20
    N
    200
    POM GF25
    N
    190
    PA 66 GF30
    N
    170
    PEEK GF30
    N
    150
    PTFE CF25
    N
    180
    PEEK CF30
    N
    160
    Honeycomb sandwich
    N
    350
    GRP
    N
    190
    GRP, CRP
    N
    190
    Graphite
    N
    340
    Hybrids
    N
    wet minimum
     
    dry
     
    Air
     

    Omschrijving

    Version:

    With crystalline diamond sp3 coating. For the highest demands regarding performance and precision in fibre-reinforced composites, CRP, GRP, and graphite. Extremely tight tolerances ensure maximum accuracy. Double relief ground with 2 hollow-ground chamfers. Recess angle α = 16°.
    Tolerances:
    • Corner radius: R1 = ±0.0025 mm
    • Neck ⌀: D1 = 0 / -0.01 mm

    Note:

    At greater tool overhang lengths, use a reduced value for ap!
    Values for:
    copying: ap = 0.10×D×ap korr
    side milling: ap = 0.20×D×ap korr
    To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!
    e.g: vf = 18000 [rpm]× fz [mm/Z]× z

    Downloads en documenten

    Diensten en productadviseurs

    Direct kopen

    Meld u aan bij uw account

    Bent u een nieuwe klant?

    Inhoud winkelwagen

    Naar de winkelwagen
    Naar de winkelwagen