{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
HM-fræser MTC 3,5 mm
Artikelnummer: 202391 3,5
Klantartikelnummer:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 3
Productdetails
Technische gegevens
| Cutting edge ⌀ DC | 3.5 mm | |
| Coating | AlCrN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 6 mm | |
| Overhang length L1 incl. recess | 13 mm | |
| Recess ⌀ D1 | 3.3 mm | |
| Overall length L | 54 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.08 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.02 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.024 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identificatienummers en classificaties
| Artikelnummer | 202391 3,5 | |
| EAN/GTIN | 4062406270803 | |
| Nummer fabrikant | 202391 3,5 |
Toepassingstabel
P
250
P
220
P
200
P
190
P
170
H
90
H
60
M
130
M
100
S
50
K
160
Omschrijving
Version:
Special flute profile. Strengthened core.
MTC rough milling up to 1.5×D in solid material.
Eccentric relief ground.
Particularly sturdy due to short overall length. Overall length similar to DIN 6527 short.
MTC rough milling up to 1.5×D in solid material.
Eccentric relief ground.
Particularly sturdy due to short overall length. Overall length similar to DIN 6527 short.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.