{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
Machine reamer configurable 32 mm
Artikelnummer: 164180 32
Klantartikelnummer:
- Snijmateriaal: HSS E
- Norm: DIN 208 B
- Spiraalhoek: 7-8
- Inwendige koeling: nee
- Schacht: Morseconus
Productdetails
Technische gegevens
| Nominal ⌀ DC | 32 mm | |
| Coating | ongecoat | |
| Snijmateriaal | HSS E | |
| Norm | DIN 208 B | |
| Spiraalhoek | 7-8 graden | |
| Inwendige koeling | nee | |
| Schacht | Morseconus | |
| Toepassing bij boringtype | bij doorlopend gat | |
| ⌀-Bereik | 31,060 mm - 32,050 mm | |
| Flute length Lc | 77 mm | |
| Afkoppellengte L1 | 190 mm | |
| Totale lengte L | 317 mm | |
| Aantal snijkanten Z | 10 | |
| Morseconus MK maat | 4 | |
| Feed f in steel < 750 N/mm2 | 0.3 mm/rev. | |
| Reaming oversize in diameter | 0.3 mm - 0.5 mm | |
| Gekleurde ring | zonder | |
| Producttype | Phillips-bit |
Identificatienummers en classificaties
| Artikelnummer | 164180 32 | |
| EAN/GTIN | 4045197092717 | |
| Nummer fabrikant | 164180 32 |
Toepassingstabel
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Omschrijving
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads en documenten
Vergelijk met soortgelijke producten
Dit artikel |
Aanbevelingen |
||
|---|---|---|---|
Machine reamer configurable 32 mm
op aanvraag
Leverbaar in 3-4 weken
0 stuks direct leverbaar
US $ 365.57
Excl. BTW
Excl. verzendkosten
|
op aanvraag
Leverbaar in 6-8 weken
0 stuks direct leverbaar
US $ 435.82
Excl. BTW
Excl. verzendkosten
|
||
| Number of cutting edges Z | 10 | 5 | 10 |
| Coating | ongecoat | uncoated | uncoated |
| Overall length L | 317 | 354 | 265 |
| Flute length Lc | 77 | 210 | 133 |
| Tool material | HSS E | HSS | HSS |
| Helix angle | 7-8 | 25 | 7-8 |
| Application for type of drilling | bij doorlopend gat | for through holes | for through holes |